So when is the next dyno inc dyno day?
07-29-2006, 06:22 PM
#1
'08 135i & '00 S4
Thread Starter
Join Date: Jul 2006
Location: norfolk
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
So when is the next dyno inc dyno day?
My intake air temps got up over 200 degF on the dyno, so I'm putting together a water injection setup, as a project to work on. It would be interesting to see how it affects the dyno numbers. I think the reason most everyone ran rich is because ecu's like to dump fuel in when the intake air gets so hot.
BTW, There are a great group of guys at dyno inc!
BTW, There are a great group of guys at dyno inc!
07-29-2006, 11:17 PM
#2
Closed 11/07
Join Date: Dec 2004
Location: Fredericksburg
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Re: So when is the next dyno inc dyno day?
What type of cooling system are they using for IATs to get that high? I can offer a few suggestions if they are interested.
07-31-2006, 03:48 PM
#6
'08 135i & '00 S4
Thread Starter
Join Date: Jul 2006
Location: norfolk
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Re: So when is the next dyno inc dyno day?
Yep, this is Dave. Do you have any logging software for your car? BTW, I've been googling for Sti's and GT turbo kits.. you have a very strong setup.
Have you considered water injection? I found a video of an evo running 20psi without.. 27-28psi with WI turned on. I've decided on putting together a 100 psi shurflo pump, aeromotive 70psi fuel pressure regulator, and two 0.8mm aquamist nozzles, for total of 400cc/min. I can setup a loop similar to the fuel injection rail, etc. I can buy the boost switch and relay off ebay cheap. The pump will have enough extra flow capacity to add a tee and extra valve to spray the face of both ICs..
Have you considered water injection? I found a video of an evo running 20psi without.. 27-28psi with WI turned on. I've decided on putting together a 100 psi shurflo pump, aeromotive 70psi fuel pressure regulator, and two 0.8mm aquamist nozzles, for total of 400cc/min. I can setup a loop similar to the fuel injection rail, etc. I can buy the boost switch and relay off ebay cheap. The pump will have enough extra flow capacity to add a tee and extra valve to spray the face of both ICs..
07-31-2006, 04:08 PM
#7
1 of 45
Join Date: Nov 2003
Location: ΣΦE
Posts: 1,068
Likes: 0
Received 0 Likes
on
0 Posts
Re: So when is the next dyno inc dyno day?
I've thought about it but I'm just using race gas for now. My motor couldn't handle all that haha. I have a utec which I can just hook up a laptop to anytime and datalog.
08-02-2006, 10:32 PM
#8
Registered Member
Join Date: Oct 2005
Location: At the edge of forever.
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Re: So when is the next dyno inc dyno day?
john...get alky!!!!!!!!!!!!!!!!! once u do that get a tune n u'll be wallking guys all day. 357 on pump wow...imagine 390-410 on pump wit alky...!
08-03-2006, 09:04 AM
#9
Registered Member
Join Date: Oct 2005
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Re: So when is the next dyno inc dyno day?
alky is the way to go its what i have and its a lifesaver.. it does nothing but good things for the engine it cleans all the carbon deposits off of everything!! but anyway the kit is for my wrx its from smc enterprises. google it and give them a call they might be able to make it work for you...
but anyway the kit is for my wrx its from smc enterprises. google it and give them a call they might be able to make it work for you...
