JZS14 Drift Car Build
#41
Re: JZS14 Drift Car Build
turns out the flange i used on my s12 is the same as the flange on my rear stock driveshaft piece
measured 22 inches from the output shaft to driveshaft flange, dropped all the pieces off @ driveline today, ill have it driving in 2 days when i get it back!
swap all together 100 percent minus the driveshaft, ill be redoing the piping again later, i just need to distribute funds towards other things atm
made a downpipe to mate up with the exhaust that came with a car
clearance is swell, all above the frame rails
startup vid
http://www.youtube.com/watch?v=iYdv7...&feature=g-upl
http://www.youtube.com/watch?v=iYdv7LqTkjI&feature=g-upl
measured 22 inches from the output shaft to driveshaft flange, dropped all the pieces off @ driveline today, ill have it driving in 2 days when i get it back!
swap all together 100 percent minus the driveshaft, ill be redoing the piping again later, i just need to distribute funds towards other things atm
made a downpipe to mate up with the exhaust that came with a car
clearance is swell, all above the frame rails
startup vid
http://www.youtube.com/watch?v=iYdv7...&feature=g-upl
http://www.youtube.com/watch?v=iYdv7LqTkjI&feature=g-upl
Last edited by David S12; 05-21-2012 at 05:45 PM.
#42
Re: JZS14 Drift Car Build
now it officially drives! but ive got the the patience to wait & finish some more wiring etc before i go dumping clutch,
lost my shifter bushing? gotta order another one at work/toyota,
need to wire up that aem wideband pictured,
need to reroute the alt wiring through the cutoff switch, the killswitch isnt turning the car off ...
figure out how to use the stock tach if i can, would be nice
order and install a coolant temp sensor/guage
buy a seat, make seat rails, install seat
aquire RL overfender (most likley buying a pair)
yadda yadda more things on a big list ive got in my head
lost my shifter bushing? gotta order another one at work/toyota,
need to wire up that aem wideband pictured,
need to reroute the alt wiring through the cutoff switch, the killswitch isnt turning the car off ...
figure out how to use the stock tach if i can, would be nice
order and install a coolant temp sensor/guage
buy a seat, make seat rails, install seat
aquire RL overfender (most likley buying a pair)
yadda yadda more things on a big list ive got in my head
#43
Re: JZS14 Drift Car Build
got some 25 mm spacers for the front
got the wrong thread pitch studs XD
just orderd some 240 ones at work & pressed em in, the front studs fit, rears dont due to a slim shank
some sr20 s12 coupe progress
got the wrong thread pitch studs XD
just orderd some 240 ones at work & pressed em in, the front studs fit, rears dont due to a slim shank
some sr20 s12 coupe progress
#45
Re: JZS14 Drift Car Build
heres my new update
finally got it off the stands & drove it out of the garage, it sounds & looks so good.. Im so excited to drift a car like this finally . Ive only drifted a KA S14 a long time ago..
ill be driving it at hyperfest june 16th if i qualify, & also driving the 17th @ Drift Nirvana. pumped!
pics of it outside letting it run, ill get more footage later..
still have tons to do! borrow a in date seat soon thats next, a battery box, gotta wire the wipers, & other things for tech!
#48
#49
#50
Re: JZS14 Drift Car Build