B-Series Turbo Parts (Greddy, Spoolin Performance, Turbosmart, Apexi)
#1
Banned
Thread Starter
Join Date: Jan 2009
Location: Roanoke (Vinton)
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
B-Series Turbo Parts (Greddy, Spoolin Performance, Turbosmart, Apexi)
Name: Nick
Location: Roanoke, VA
Contact: PM or email Nick.Moorman@Gmail.com
Trades -NO LONGER TAKING TRADES I GOT MY USP .45!!
Price: Listed below!
Kit didn't sell on ebay...so i guess i'll part need the money...
http://cgi.ebay.com/ebaymotors/ws/eB...%3AMESELX%3AIT
Ok, here is the deal with this kit. I have been piecing together a beast turbo kit for my Civic hatch for about 4 months with anticipation of turbocharging the car this June. However life has had other plans for me, and the transmission has gone on me. So I am in need of money to replace the transmission before I can turbo the car. I'm also trying to weigh choices of if I really need a 450hp car when I start Law School next year as I already have a new Nissan as a daily.
Anyways; my loss is your gain. So far I have about $1500 tied up in these parts here. Thats pretty cheap for an all name brand turbo kit, however like I said i've been watching local internet sites, craigslist, etc, and I've gotten really good deals on all this stuff. Alot of these parts are BRAND NEW, I will list whats what on the parts list below. The paint on the Downpipe, Dumptube, and Manifold is Thermalox 4700. Its used on the painting of Industrial Graphite Heat Exchangers, and I had my brother paint them for me at his work. It's actual Thermal Coat, it holds heat in! So no need for heat wrap. The stuff is about $400 an oz. The pieces were also sandblasted completely clean before sprayed (not that they needed it from being new anyway).
Parts List:
Spoolin Performance Log Style Manifold - (Thermal Coated) [BRAND NEW]
Spoolin Performance 2.5" Downpipe - (Thermal Coated) [BRAND NEW]
Spoolin Performance Dumptube - (Thermal Coated) [BRAND NEW]
^^^These I'm still selling together as a set, $350 takes them.
Turbosmart 38mm Wastegate - [Used, has a few scuffs, 12psi spring] - $125
Turbosmart Manual Boost Controller - [BRAND NEW, includes original box] - $50
Greddy Type RS BOV - [Used, but guaranteed to be genuine Greddy, not an ebay knockoff] - $100 SOLD
Walbro 255 Fuel Pump - [BRAND NEW, still in plastic wrap] - $90 SOLD
Apexi Turbo Timer - [BRAND NEW, took this out of box to go ahead and install, but i suck at electrical so gave up, you'll be able to tell its brand new when you see it] - $50
Blox Vaccum Block - [BRAND NEW, took out of package to install, again when you see it you can tell its brand new never been used] - $50
Glowshift Boost Gauge - [BRAND NEW, 35psi Max, took out of package to install, again same deal its new, promise] - $50
Oil Feed Line - [Used, in relatively decent shape, I was gonna use it] - $15
ALL NEW GASKETS - Manifold, Downpipe, Wastegate, Dumptube gaskets.... - $25
Essentially all you will need to finish the kit is a Turbo, Injectors, Intercooler kit, and a way to tune. MY LOSS IS YOUR GAIN!
Location: Roanoke, VA
Contact: PM or email Nick.Moorman@Gmail.com
Trades -NO LONGER TAKING TRADES I GOT MY USP .45!!
Price: Listed below!
Kit didn't sell on ebay...so i guess i'll part need the money...
http://cgi.ebay.com/ebaymotors/ws/eB...%3AMESELX%3AIT
Ok, here is the deal with this kit. I have been piecing together a beast turbo kit for my Civic hatch for about 4 months with anticipation of turbocharging the car this June. However life has had other plans for me, and the transmission has gone on me. So I am in need of money to replace the transmission before I can turbo the car. I'm also trying to weigh choices of if I really need a 450hp car when I start Law School next year as I already have a new Nissan as a daily.
Anyways; my loss is your gain. So far I have about $1500 tied up in these parts here. Thats pretty cheap for an all name brand turbo kit, however like I said i've been watching local internet sites, craigslist, etc, and I've gotten really good deals on all this stuff. Alot of these parts are BRAND NEW, I will list whats what on the parts list below. The paint on the Downpipe, Dumptube, and Manifold is Thermalox 4700. Its used on the painting of Industrial Graphite Heat Exchangers, and I had my brother paint them for me at his work. It's actual Thermal Coat, it holds heat in! So no need for heat wrap. The stuff is about $400 an oz. The pieces were also sandblasted completely clean before sprayed (not that they needed it from being new anyway).
Parts List:
Spoolin Performance Log Style Manifold - (Thermal Coated) [BRAND NEW]
Spoolin Performance 2.5" Downpipe - (Thermal Coated) [BRAND NEW]
Spoolin Performance Dumptube - (Thermal Coated) [BRAND NEW]
^^^These I'm still selling together as a set, $350 takes them.
Turbosmart 38mm Wastegate - [Used, has a few scuffs, 12psi spring] - $125
Turbosmart Manual Boost Controller - [BRAND NEW, includes original box] - $50
Greddy Type RS BOV - [Used, but guaranteed to be genuine Greddy, not an ebay knockoff] - $100 SOLD
Walbro 255 Fuel Pump - [BRAND NEW, still in plastic wrap] - $90 SOLD
Apexi Turbo Timer - [BRAND NEW, took this out of box to go ahead and install, but i suck at electrical so gave up, you'll be able to tell its brand new when you see it] - $50
Blox Vaccum Block - [BRAND NEW, took out of package to install, again when you see it you can tell its brand new never been used] - $50
Glowshift Boost Gauge - [BRAND NEW, 35psi Max, took out of package to install, again same deal its new, promise] - $50
Oil Feed Line - [Used, in relatively decent shape, I was gonna use it] - $15
ALL NEW GASKETS - Manifold, Downpipe, Wastegate, Dumptube gaskets.... - $25
Essentially all you will need to finish the kit is a Turbo, Injectors, Intercooler kit, and a way to tune. MY LOSS IS YOUR GAIN!
Last edited by nikatrel; 04-29-2010 at 03:31 PM. Reason: selling kit as whole not parting
#4
Re: B-Series Turbo Parts (Greddy, Spoolin Performance, Turbosmart, Apexi)
pics of the manifold? bboygreddy@yahoo.com