LS/B20 Eagle rods, CP Pistons, GSR head, GSR block, B20 motor...I need a s300 Asap
08-31-2014, 07:46 AM
#1
Registered member
Thread Starter
Join Date: Jun 2008
Location: NOVA
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
LS/B20 Eagle rods, CP Pistons, GSR head, GSR block, B20 motor...I need a s300 Asap
Name: Thomas
Location: manassas, VA
Means of contact: 703-505-0215/post/pm
Price: $500,000..need a s300 ASAP!!
Description:
I just picked up a new motor and decided to go a different route in my build..so here's what I collected so far:
Eagle Rods for LS/B20: only about 100 miles on them $250
GSR head, no dizzy with stock manifold, was pressure tested by machine shop: $400
GSR block with b20 crank, ACL bearings, type R water pump, type R timing belt, no pistons or rods $400
84mm CP pistons 9:1 compression: only about 100 miles on them :$350
84mm Oem head gasket- BN :$75
Pictures:
Location: manassas, VA
Means of contact: 703-505-0215/post/pm
Price: $500,000..need a s300 ASAP!!
Description:
I just picked up a new motor and decided to go a different route in my build..so here's what I collected so far:
Eagle Rods for LS/B20: only about 100 miles on them $250
GSR head, no dizzy with stock manifold, was pressure tested by machine shop: $400
GSR block with b20 crank, ACL bearings, type R water pump, type R timing belt, no pistons or rods $400
84mm CP pistons 9:1 compression: only about 100 miles on them :$350
84mm Oem head gasket- BN :$75
Pictures:
Last edited by ttali211; 09-20-2014 at 05:50 AM.
