98 SE-R: Mitch Piper Custom RollBar/B15 gearbox/Fidanza flywheel/FX500/etc
04-15-2014, 07:52 PM
#11
DurrHurr
Join Date: Oct 2008
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 SE-R: Mitch Piper Custom RollBar/B15 gearbox/Fidanza flywheel/FX500/etc
i`m sorry but what makes this predominately all stock, rusting, 160K+ sentra with a cage almost 4k?
I got my 2005 se-r with a suspension, zero rust and 40k less miles for $4k. Your reply to that mans offer sounds a bit to snotty and condescending for someone running around in an old beat sentra with a cage.
cage seems so outta place here.
Last edited by SoWhat; 04-15-2014 at 08:08 PM. Reason: fuck the alphabete
04-16-2014, 07:04 AM
#12
Registered member
Join Date: Mar 2011
Location: Hampton,VA
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 SE-R: Mitch Piper Custom RollBar/B15 gearbox/Fidanza flywheel/FX500/etc
i`m sorry but what makes this predominately all stock, rusting, 160K+ sentra with a cage almost 4k?
I got my 2005 se-r with a suspension, zero rust and 40k less miles for $4k. Your reply to that mans offer sounds a bit to snotty and condescending for someone running around in an old beat sentra with a cage.
cage seems so outta place here.
I got my 2005 se-r with a suspension, zero rust and 40k less miles for $4k. Your reply to that mans offer sounds a bit to snotty and condescending for someone running around in an old beat sentra with a cage.
cage seems so outta place here.
04-16-2014, 08:57 AM
#13
Registered Member
Join Date: Mar 2013
Location: Gloucester, VA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
04-16-2014, 02:39 PM
#14
Registered Member
Thread Starter
Join Date: Nov 2004
Posts: 1,054
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 SE-R: Mitch Piper Custom RollBar/B15 gearbox/Fidanza flywheel/FX500/etc
i`m sorry but what makes this predominately all stock, rusting, 160K+ sentra with a cage almost 4k?
I got my 2005 se-r with a suspension, zero rust and 40k less miles for $4k. Your reply to that mans offer sounds a bit to snotty and condescending for someone running around in an old beat sentra with a cage.
cage seems so outta place here.
I got my 2005 se-r with a suspension, zero rust and 40k less miles for $4k. Your reply to that mans offer sounds a bit to snotty and condescending for someone running around in an old beat sentra with a cage.
cage seems so outta place here.
I could care less on what you got your SE-R as the QR engine likes to eat valves, have the precats fail, the early gearboxes have synchro problems and the bottom end bearings and balance shaft absolutely destroy the engine with less than 100,000 miles
In accordance with my vehicle, several things
1) Price is OBO (not lowball, its OBO!)
2) The rollbar itself would be more than 1,000 to fabricate from Mitch Piper (which I have a receipt for)$
3) The gearbox is $6-$800 and hard to fine (which I have a Paypal receipt for)
4) The clutch/flywheel/axle setup is another $6-$800 (which I have receipts for)
5) And the going rate a decent condition SE-R is about 2-2.5K.
Please do the math and stop shitting on my thread. This makes the perfect baseline to slap in a turbo kit (about 800) and some suspension and rock hard for less than $5,000 total investment
If you are NOT buying the car or have interest, please REFRAIN from posting in my thread
Post reported. Thanks
04-16-2014, 07:51 PM
#15
2doors plus 2.
Join Date: Jun 2011
Location: 540
Posts: 1,864
Likes: 0
Received 0 Likes
on
0 Posts
I could care less on what you got your SE-R as the QR engine likes to eat valves, have the precats fail, the early gearboxes have synchro problems and the bottom end bearings and balance shaft absolutely destroy the engine with less than 100,000 miles
In accordance with my vehicle, several things
1) Price is OBO (not lowball, its OBO!)
2) The rollbar itself would be more than 1,000 to fabricate from Mitch Piper (which I have a receipt for)$
3) The gearbox is $6-$800 and hard to fine (which I have a Paypal receipt for)
4) The clutch/flywheel/axle setup is another $6-$800 (which I have receipts for)
5) And the going rate a decent condition SE-R is about 2-2.5K.
Please do the math and stop shitting on my thread. This makes the perfect baseline to slap in a turbo kit (about 800) and some suspension and rock hard for less than $5,000 total investment
If you are NOT buying the car or have interest, please REFRAIN from posting in my thread
Post reported. Thanks
I will agree $1500 is a pretty shitty lowball offer.
04-24-2014, 05:09 AM
#16
Registered Member
Join Date: Apr 2006
Location: Fairfax, VA
Posts: 619
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 SE-R: Mitch Piper Custom RollBar/B15 gearbox/Fidanza flywheel/FX500/etc
Is the custom battery bracket a ratchet strap? I guess you could call the custom.
05-07-2014, 05:56 PM
#17
Registered Member
Thread Starter
Join Date: Nov 2004
Posts: 1,054
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 SE-R: Mitch Piper Custom RollBar/B15 gearbox/Fidanza flywheel/FX500/etc
Bump please
05-10-2014, 04:08 AM
#18
Registered Member
Thread Starter
Join Date: Nov 2004
Posts: 1,054
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 SE-R: Mitch Piper Custom RollBar/B15 gearbox/Fidanza flywheel/FX500/etc
Bump it up please!
05-18-2014, 05:18 AM
#19
Registered Member
Thread Starter
Join Date: Nov 2004
Posts: 1,054
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 SE-R: Mitch Piper Custom RollBar/B15 gearbox/Fidanza flywheel/FX500/etc
Lets get this sold!!
06-20-2014, 06:53 PM
#20
Registered Member
Thread Starter
Join Date: Nov 2004
Posts: 1,054
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 SE-R: Mitch Piper Custom RollBar/B15 gearbox/Fidanza flywheel/FX500/etc
3000 bump!!!! Come and get it!