My next mod, Oil Cooler
#21
Sorry I cursed you. Another thing to watch out for. Make absolutely sure those braided lines are not touching anything soft. My friend installed a cooler just like yours and zip tied one of the braided lines to one of his power steering lines and it ended up sawing through the power steering line. While loosing power steering is not critical, it makes a big mess.
#22
Mr. Inconspicuous
Thread Starter
Join Date: Nov 2002
Location: Hampton
Posts: 689
Likes: 0
Received 0 Likes
on
0 Posts
Thanks again. I was just kidding about the curse. It is kinda funny to think of someone with a little green matchbox sentra and poking holes in the tires and stuff. I did make sure it was not touching anything
#23
We always used to use to the filter adapters that were machined out of a piece of billett aluminum for that reason. They were always more expensive, but with the cheaper filter adapters you had to carry around 2 or 3 all the time as they failed with regularity. The ones I used were from Stock Car Products Inc. or BSR
#24
Mr. Inconspicuous
Thread Starter
Join Date: Nov 2002
Location: Hampton
Posts: 689
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by roadRacer
We always used to use to the filter adapters that were machined out of a piece of billett aluminum for that reason. They were always more expensive, but with the cheaper filter adapters you had to carry around 2 or 3 all the time as they failed with regularity. The ones I used were from Stock Car Products Inc. or BSR
We always used to use to the filter adapters that were machined out of a piece of billett aluminum for that reason. They were always more expensive, but with the cheaper filter adapters you had to carry around 2 or 3 all the time as they failed with regularity. The ones I used were from Stock Car Products Inc. or BSR
Steve
#25
nice yeah i u can get volvo s/v40 that has 170 hp stock with $1500 dollar upgrade u got 230 at fly but they only come in auto/tiptronic.. /) dont knwo about that get the new volvo s60 r
http://www.volvocars.com/r/specs.html
http://www.volvocars.com/r/specs.html
#26
Mr. Inconspicuous
Thread Starter
Join Date: Nov 2002
Location: Hampton
Posts: 689
Likes: 0
Received 0 Likes
on
0 Posts
For 1500 I can get an entire engine for my nissan that puts out 190whp and 220 with just basic I/H/E NA. 230 is not that impressive for a turbo engine.
Thread
Thread Starter
Forum
Replies
Last Post