b18c valve cover ground holes
#31
Re: b18c valve cover ground holes
Well I was going to put some things to point out the obvious idiots here, but out of respect for this forum already being a breading ground for morons on computers I am just going to leave my 2 cents out. But anyways, just use the ground shown in the first pic, hell add more if you want the more grounds the better. Just make sure the grounding points are clean and good contact has been made with the body/engine/trans and the connections used on the grounding wire are just as good.
#32
Registered Member
Thread Starter
Join Date: Feb 2011
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Re: b18c valve cover ground holes
Haha your stupidity amazes me. Of course they don't have a head ground. They have wire tucked everything for looks not performance. They also got rid of ac ps abs, so does this mean it works better without it? No. Any performance engine and you will have a ground to valve cover.
#34
Registered Member
Thread Starter
Join Date: Feb 2011
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Re: b18c valve cover ground holes
Okay scratch performance and put practical. What dd car doesnt have abs ps or ac.... its good stuff to have. Obv i dont need a ground but it is prefered
#35
Re: b18c valve cover ground holes
but I do have a ground on my head just not the weak factory location
Last edited by JustaGSR18; 04-11-2011 at 01:15 PM.
#36
Home Wrecker
Join Date: Jan 2009
Location: in your thread
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
Re: b18c valve cover ground holes
Wow brah. And no were did we say you don't need a ground, just that there are better locations than the stock location.
#38
Home Wrecker
Join Date: Jan 2009
Location: in your thread
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
peanuts8888
Engine / Exhaust / Drivetrain
4
12-04-2010 08:10 AM