Supra Build
11-30-2010, 12:34 PM
#61
Registered Member
Thread Starter
Join Date: Aug 2009
Location: Arlington
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Re: Supra Build
Looks like its coming along man, if you don't know already supramania.com is the best place for mk3 supra info
If your wanting to do a 2jz swap it should be pretty easy
-the late model 7m's have the same mounts as the 2jz
-use your stock tranny if its in good shape all you'll need is a 1jz bellhousing to make everything bolt up
-to make the swap easier alot of people have started running the 2jz's on the stock 7mgte eleconics
but like i said everything you need to know is on supramania but for the life of me i can't understand the mk3 supra hate on this board
If your wanting to do a 2jz swap it should be pretty easy
-the late model 7m's have the same mounts as the 2jz
-use your stock tranny if its in good shape all you'll need is a 1jz bellhousing to make everything bolt up
-to make the swap easier alot of people have started running the 2jz's on the stock 7mgte eleconics
but like i said everything you need to know is on supramania but for the life of me i can't understand the mk3 supra hate on this board
01-26-2011, 05:52 PM
#62
Registered Member
Thread Starter
Join Date: Aug 2009
Location: Arlington
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Re: Supra Build
FINALLY got my motor today.
Only have one pic of when i picked it up, got home and was getting punished by all this snow so i haven't gone back out since. I'll have more later on in the week.
I was able to pull the motor out from the back of the truck yesterday after our little snow storm, here are a couple more pics of the motor.
got the motor to the back of the house.
i couldn't use the motor jack to bring the motor to back, it kept sinking in the snow and then into my grass fucking up my yard a little, so i did the next bes thing and put it on the floor and dragged it through the snow = D
Only have one pic of when i picked it up, got home and was getting punished by all this snow so i haven't gone back out since. I'll have more later on in the week.
I was able to pull the motor out from the back of the truck yesterday after our little snow storm, here are a couple more pics of the motor.
got the motor to the back of the house.
i couldn't use the motor jack to bring the motor to back, it kept sinking in the snow and then into my grass fucking up my yard a little, so i did the next bes thing and put it on the floor and dragged it through the snow = D
Last edited by Hans; 02-21-2011 at 09:30 AM.
02-16-2011, 01:09 PM
#63
Registered Member
Thread Starter
Join Date: Aug 2009
Location: Arlington
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Re: Supra Build
So today was pretty nice day, so i did a little bit of cleaning to the trans i pulled out of my car and am reusing. I didn't clean the bell housing because I'm getting a new 1jz bell housing so it can bolt up to my 2jz
Trans came out of the car dirty as shit.
One half of the trans cleaned.
Now the other half
Special tools for this job today lol.
Trans came out of the car dirty as shit.
One half of the trans cleaned.
Now the other half
Special tools for this job today lol.
02-16-2011, 03:00 PM
#64
Registered Member
Join Date: Sep 2008
Location: Roanoke
Posts: 949
Likes: 0
Received 0 Likes
on
0 Posts
Re: Supra Build
I agree with who said SBC. my buddy has got a white one with a 350 with a holly 4 barrel, race headers, 2 1/2 exhaust, mild cam, heads, MSD ignition i think? hooked up to a turbo 350 with a shift kit. caged with gutted interior. needless to say runs its damn ass off
02-21-2011, 09:27 AM
#69
Registered Member
Thread Starter
Join Date: Aug 2009
Location: Arlington
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
02-21-2011, 09:29 AM
#70
Registered Member
Thread Starter
Join Date: Aug 2009
Location: Arlington
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts