Firewall Grommets...
#1
make 7 UP yours
Thread Starter
Join Date: Oct 2006
Location: Hampton, VA
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
Firewall Grommets...
Found some info and wanted to share
Normally find them in stock at: http://www.hondapartsnow.com/interio...a~grommet.html
Just search and order, good information for someone shaving the firewall that does not have the time and tools to weld it right away but still want a temporary (or permanent) solution that looks clean
Enjoy
Normally find them in stock at: http://www.hondapartsnow.com/interio...a~grommet.html
Just search and order, good information for someone shaving the firewall that does not have the time and tools to weld it right away but still want a temporary (or permanent) solution that looks clean
Enjoy
#5
make 7 UP yours
Thread Starter
Join Date: Oct 2006
Location: Hampton, VA
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
Re: Firewall Grommets...
I think if you weld them all shut you should still just plug these holes and get a larger piece to flatten it all out and make it smooth instead of patching each one
#7
GUIBO!?
Join Date: May 2004
Location: Virginia Beach
Posts: 5,999
Likes: 0
Received 0 Likes
on
0 Posts
Re: Firewall Grommets...
does honda (or another any other make for that matter) have sites like realoem.com or bmwfans.info? makes it real easy to do part number searches
#8
Registered Member
Join Date: Jan 2011
Location: Spotsylvania
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
#10
Registered member
Join Date: May 2006
Location: Roanoke
Posts: 3,781
Likes: 0
Received 0 Likes
on
0 Posts
Re: Firewall Grommets...
I've just used a grommet from Lowes' hardware section to fill the cruise cable hole.I believe it was 1" diameter,but you should definitely measure to be sure.
As far as that goes,the OEM stuff is nice for the oblong holes like the A/C or harness holes,but for regular 3/4",1" or whatever size round holes,any hardware store will have grommets for probably 1/10th the price,and with no wait.
As far as that goes,the OEM stuff is nice for the oblong holes like the A/C or harness holes,but for regular 3/4",1" or whatever size round holes,any hardware store will have grommets for probably 1/10th the price,and with no wait.