My clutch sticks to the floor
#1
Registered Member
Thread Starter
Join Date: Oct 2006
Location: VA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
![nazir1 is an unknown quantity at this point](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![Default](https://www.vadriven.com/forums/images/icons/icon1.gif)
the other day i was driving and i shifted and the clutch just stuck to the floor. i had to put my foot underneath it and pull it up. its the first time that it has happend and it hasnt happend again since but i wanna get rid of the problem before it gets worst....any advice?
#2
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Default](https://www.vadriven.com/forums/images/icons/icon1.gif)
The clutch is supposed to go in the engine, not in the car. ![Big Grin](https://www.vadriven.com/forums/images/smilies/biggrin.gif)
You likely have a clutch master cylinder or slave cylinder problem. Usually they get worn seals and need to be replaced. I can't remember how to narrow it down to one or the other, but someone will reply with that.
It's also possible that you are low on fluid or your clutch system needs to be bled, which could be the case if it only happened once. Bleed the system and see what happens; it's always cheaper to try that first before replacing the master or slave cylinder and that may be your only problem.
![Big Grin](https://www.vadriven.com/forums/images/smilies/biggrin.gif)
You likely have a clutch master cylinder or slave cylinder problem. Usually they get worn seals and need to be replaced. I can't remember how to narrow it down to one or the other, but someone will reply with that.
It's also possible that you are low on fluid or your clutch system needs to be bled, which could be the case if it only happened once. Bleed the system and see what happens; it's always cheaper to try that first before replacing the master or slave cylinder and that may be your only problem.
#3
I drive a coupe
Join Date: Feb 2004
Location: Virginia Beach
Posts: 762
Likes: 0
Received 0 Likes
on
0 Posts
![Hatch Man(GsR)](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![Hatch Man(GsR)](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![Hatch Man(GsR)](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![Hatch Man(GsR)](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![Hatch Man(GsR)](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![Hatch Man(GsR)](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Hatch Man(GsR)](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Hatch Man(GsR)](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Hatch Man(GsR)](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Hatch Man(GsR)](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Hatch Man(GsR)](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Default](https://www.vadriven.com/forums/images/icons/icon1.gif)
Yessir, assuming you have a hydrolic clutch system...
You definately have air in the system one way or another.
To check your slave cylinder, unbolt it and remove the boot from the end, if there is any fluid inside the boot you have a bad slave cylinder..
Also, check under the dash to see if you have any fluid coming from your clutch master cylinder around the rod.
You definately have air in the system one way or another.
To check your slave cylinder, unbolt it and remove the boot from the end, if there is any fluid inside the boot you have a bad slave cylinder..
Also, check under the dash to see if you have any fluid coming from your clutch master cylinder around the rod.
#4
![Default](https://www.vadriven.com/forums/images/icons/icon1.gif)
The clutch is supposed to go in the engine, not in the car. ![Big Grin](https://www.vadriven.com/forums/images/smilies/biggrin.gif)
You likely have a clutch master cylinder or slave cylinder problem. Usually they get worn seals and need to be replaced. I can't remember how to narrow it down to one or the other, but someone will reply with that.
It's also possible that you are low on fluid or your clutch system needs to be bled, which could be the case if it only happened once. Bleed the system and see what happens; it's always cheaper to try that first before replacing the master or slave cylinder and that may be your only problem.
![Big Grin](https://www.vadriven.com/forums/images/smilies/biggrin.gif)
You likely have a clutch master cylinder or slave cylinder problem. Usually they get worn seals and need to be replaced. I can't remember how to narrow it down to one or the other, but someone will reply with that.
It's also possible that you are low on fluid or your clutch system needs to be bled, which could be the case if it only happened once. Bleed the system and see what happens; it's always cheaper to try that first before replacing the master or slave cylinder and that may be your only problem.
#6
![Default](https://www.vadriven.com/forums/images/icons/icon1.gif)
Check the fluid, if thats not it you may need a clutchplate and all, we just did one in my boys 350z and his did the same thing. It usually happens if you ride the clutch too much.
#7
IM BACK BITCH"S
Join Date: Aug 2006
Location: Asscrackistan. 757
Posts: 2,450
Likes: 0
Received 0 Likes
on
0 Posts
![droptoprx7 is a name known to all](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![droptoprx7 is a name known to all](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![droptoprx7 is a name known to all](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![droptoprx7 is a name known to all](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![droptoprx7 is a name known to all](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![droptoprx7 is a name known to all](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Default](https://www.vadriven.com/forums/images/icons/icon1.gif)
assuming that the cars most likely older i would just swap both when im at it.... cheack the fluid 2 and swap it out when your at it
#8
![Default](https://www.vadriven.com/forums/images/icons/icon1.gif)
clutch 101
1. check fluid
2. check for leaks near slave cylinder on the trans and the clutch master cylinder rod which is connected to the clutch pedal.
3.if no leaks found bleed the clutch system.
1. check fluid
2. check for leaks near slave cylinder on the trans and the clutch master cylinder rod which is connected to the clutch pedal.
3.if no leaks found bleed the clutch system.
#9
Registered member
Join Date: Jan 2004
Location: uranus
Posts: 5,063
Likes: 0
Received 0 Likes
on
0 Posts
![BeefCake](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![BeefCake](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![BeefCake](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![BeefCake](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![BeefCake](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![BeefCake](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![BeefCake](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![BeefCake](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![BeefCake](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![BeefCake](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![BeefCake](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
#10
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_pos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Fabrik8](https://www.vadriven.com/forums/images/reputation/reputation_highpos.gif)
![Default](https://www.vadriven.com/forums/images/icons/icon1.gif)
A bad clutch plate wouldn't cause the clutch pedal to stay on the floor. You'd still have return pressure from the hydraulic system acting on the pressure plate.