RC6X90

Ok so my throwout bearing started making a noise will the clutch is pedal is engaged. I ordered a new bearing pulled the trany out to replace it, no big deal. Went ti swap them out and the new bearing will not fit over the collar of the input shaft. Ive callef advance autozone fisher and napa and the part number for a 99 civic si trans is a timken 614122. This is the same bearing I have that will not fit. Has anyone ran across this before? I did some searching and found one old thread and the guy said he had the same problem and used a timken 614068 it crossed as a multiple fit item for several hondas but didnt give an exact description. Can anyone vouche for this? Any info is better than what I have now.

RC6X90

Btw the old bearing was worn out

Jenkinsal2

Are you certain that you have an Si Transmission? I see people get screwed over all the time not knowing exactly what they are being sold.

RC6X90

It has s4c on the tag and stamped and then vin tag is still on it it has em1 whuch is an si and the tenth digit on the vin tag is y which means its a 99. and I dont think an ls trans would be tachin 3800 @70 mph. please correct me if im wrong but im reasonably sure im right

crxmadness

I would return the the timken and order the oem bearing from majestic honda.

http://www.hondaautomotiveparts.com/

RC6X90

My father in law works at autozone so thats why I have a timken. He ordered me another bearing which is the 2nd p.n614068 which will be in tomorow. If I have to I probaly will order an oem one. But im hoping this other on us right.

RC6X90

The old ones number is np-55scrn41p made in japan and it had nachi im guessing is the mfg company

crxmadness

I’m just saying, if you would like less headaches in the future just order OEM parts.

Fabrik8

Why didn't you get them to cross ref a throwout bearing for an Integra....? Don't all of the B-series hydro transmissions use the same throwout bearing?

RC6X90

You would think so apparantly they use different size flywheels and input shafts. Btw the integras use the same input shafts looked up a 94 ls and a 99 gsr same p.n. For the t.b