Looking for shop to do Turbo install/dyno's too
#1
WTF I'm HISPANIC!!
Thread Starter
Join Date: May 2005
Location: Norfolk
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Looking for shop to do Turbo install/dyno's too
Hi all, new here, so what's up. I got a 01 Integra GSR that i'm looking to boost. I've already got the i/h/e on, coilovers (rear ones will be on soon since that damn lower control arm bolt won't come off, thank god for torches ) and i'm also upgrading the suspension as we speak. I'm looking to start working on the engine bay within the next 2 months, and i'd like to find a shop that will install the turbo (rev hard stage 2 turbo at 8psi or if they got someone who will do port/polish then i may wait a little longer and go with a rebuilt bottom end and a rev hard stage 3 at 15 psi). Any suggestions would be great. I've been in the Norfolk area for about 2 years now but didn't really start getting into cars in general till about a year and a half ago and am now undertaking the building of mine.
Things done:
Skunk2 Cat Back Exhaust
AEM short ram Intake
DC Sports Ceramic 4-2-1 Header
DC sports short shifter
Omnipower Coilovers (sport)(rear not on but hopefully will have them soon)
Skunk2 front camber kit
Things have but haven't put on:
Comptech 22mm rear sway bar
Comptect rear upper and lower tie bars
Things on order:
Energy suspension LCA Bushings (need for the rear coilovers)
Energy suspension Motor mounts
Powerslot front big brake upgrade
AEM Fuelrail
Whalbro 255 fuelpump
AEM fuel pressure regulator
Once i get the fuel system up and on there (i've done all my own work up till now with some friends, but i'm not confident with the turbo), and i find a shop that will do the work i'll get the new cams/camgears/flywheel/clutch/plugs.
Feel free to email/PM me with any info and if you see the white teg with the lowered front and high rear that's me (got white 17" Volk TE37's too)
Things done:
Skunk2 Cat Back Exhaust
AEM short ram Intake
DC Sports Ceramic 4-2-1 Header
DC sports short shifter
Omnipower Coilovers (sport)(rear not on but hopefully will have them soon)
Skunk2 front camber kit
Things have but haven't put on:
Comptech 22mm rear sway bar
Comptect rear upper and lower tie bars
Things on order:
Energy suspension LCA Bushings (need for the rear coilovers)
Energy suspension Motor mounts
Powerslot front big brake upgrade
AEM Fuelrail
Whalbro 255 fuelpump
AEM fuel pressure regulator
Once i get the fuel system up and on there (i've done all my own work up till now with some friends, but i'm not confident with the turbo), and i find a shop that will do the work i'll get the new cams/camgears/flywheel/clutch/plugs.
Feel free to email/PM me with any info and if you see the white teg with the lowered front and high rear that's me (got white 17" Volk TE37's too)
Last edited by Felony2030; 05-30-2005 at 12:04 PM.
#3
Handling is Key!
Join Date: Jul 2003
Location: Virginia Beach, Virginia
Posts: 1,545
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for shop to do Turbo install/dyno's too
Millennium Autosport can do the install no problem and we also have an in house dyno that we can do b4 and after pulls so you see your gains from the turbo install!!!
853 7771
853 7771
#4
Re: Looking for shop to do Turbo install/dyno's too
Originally Posted by V8 Hunter
Millennium Autosport can do the install no problem and we also have an in house dyno that we can do b4 and after pulls so you see your gains from the turbo install!!!
853 7771
853 7771
#5
Registered Member
Join Date: May 2003
Location: Chesapeake
Posts: 526
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for shop to do Turbo install/dyno's too
Get with me or Terry aka boostfed and we can hook it up. Give him a call at 424-3042 You can see the work we have done and I am sure you will save lots more money. We can get stuff Cheap. Terry is a dealer for almost anything. I am the fabricator. Late
#6
WTF I'm HISPANIC!!
Thread Starter
Join Date: May 2005
Location: Norfolk
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for shop to do Turbo install/dyno's too
Good time to call? Like to meet up and check out your work and see what we can do, I'm always open to more options and who knows I may bring some friends
#10
Bitches get Stitches
Join Date: Mar 2003
Location: Chesapeake
Posts: 3,959
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for shop to do Turbo install/dyno's too
Originally Posted by "SI"ngle Cam
I also vouch for Jim....He can do more in his driveway than most shops can