visualmadness

Ok a buddy of mine has a ek hatch with b series swap, he is going boost so he is removing the whole ac unit....lines, comp, condensor, bracket ect ect.......i have a eg coupe with a b series swap also with no ac lines or anything! Will his unit work into my car? or what would i have to do to make it work?

Please text me with helpful advice

Foaminhardbruh

Bro, I'd remove your number before you get trolled, And no you can't use the same system from my knowledge, Go to pick n pull, and you can buy all the lines, and everything else minus compressor for 68.35, Just had a buddy come with me and pick a kit up for that. Check on picknpull.com for prices and for a list of hondas they currently have in the yard available.

visualmadness

Yea but that wont bolt up to my b series.....what would i need other than.eg lines to make.it work

ravenracer

I do not think it will work since it has a different condenser, lines, etc. I think you are better off buying a custom kit.

or why not pick up an B-series A/C kit ?. You might just need to relocate some stuff but it can work with some custom work ?

Maybe someone else can give some input

visualmadness

Appreciate the help yall

wright

To make the D series compressor work on a B series swap you will need to get the Del-Sol Vtec A/C bracket. This allows a D series compressor to bolt to a B series block.

visualmadness

Del sol si? (b16) one?

TRQLESS

Yes, just make sure it is the b16 one. NOT the z6 one.

visualmadness

So all i need is that bracket and i can use the whole stock ac system from a eg?

TRQLESS

Yes. The bracket accepts a D series compressor for a B series block. This is exactly what I used in my eg hatch with a GSR motor. I found the bracket on ebay, but this was years ago.

Edit:

I'm feeling nice, and did the work for you click this link for the bracket http://www.ebay.com/itm/CIVIC-DEL-SO...184651&vxp=mtr it's a p30 a/c bracket. P30 refers to a b16 del sol.