0 offset on EG or EJ ???
#5
I Love to Hate
Join Date: Mar 2006
Location: Va Beach
Posts: 6,777
Likes: 0
Received 0 Likes
on
0 Posts
Re: 0 offset on EG or EJ ???
They won't "fit" but you can stuff them in with tons of work. They will poke out of the fenders about 2 inches. 002's are one of my favorite wheel but only in 0 offset and that's why i don't have a set. Think mexi-neon status with 12" -15 wire wheels. that's about the look.
#6
I Roll Fenders
Join Date: Jan 2005
Location: Chesapeake
Posts: 7,083
Likes: 0
Received 0 Likes
on
0 Posts
Re: 0 offset on EG or EJ ???
I know this isn't a EG/EJ but this isn't mexi fitment:
Don't expect it to not involve some work though.
Basically you have to go really low, and you have to run lots of camber, and stretch tires and probably pull your fenders at least a little.
Edit:
This is a EK right? From what I could tell EGs/EKs have very similar fenders (since I've rolled both).
That's what happens when you do it wrong - it isn't low enough and the sidewall is way too big.
Finally found an EG:
PS Get 16s....you can't pull off this look with 15s on a EG....you can on a HF but not an EG.
edit again - those are +15s on those cars up there....so get some 16X8 +15s.
edit AGAIN!:
15X8 +15....not too bad 16s would look better and let you lower it more w/o actually having the body of the car be as low...and 16s have better tire choices.
Don't expect it to not involve some work though.
Basically you have to go really low, and you have to run lots of camber, and stretch tires and probably pull your fenders at least a little.
Edit:
This is a EK right? From what I could tell EGs/EKs have very similar fenders (since I've rolled both).
That's what happens when you do it wrong - it isn't low enough and the sidewall is way too big.
Finally found an EG:
PS Get 16s....you can't pull off this look with 15s on a EG....you can on a HF but not an EG.
edit again - those are +15s on those cars up there....so get some 16X8 +15s.
edit AGAIN!:
15X8 +15....not too bad 16s would look better and let you lower it more w/o actually having the body of the car be as low...and 16s have better tire choices.
Last edited by WishIHadaSilvia; 12-15-2008 at 08:23 PM.
#7
Re: 0 offset on EG or EJ ???
PM chris@fortune...he had the q45 and that s14...knwos his stuff when it comes to fender work and wheel fitment. He's in richmond
Also have a looksee here
http://honda-tech.com/showthread.php?t=1810618
Also have a looksee here
http://honda-tech.com/showthread.php?t=1810618
#9
Registered Member
Join Date: Oct 2005
Location: NOVA
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
Re: 0 offset on EG or EJ ???
Its possible, you will need to run a 195 tire & lots of neg camber. its the new trend I guess, not functional @ all but if yourent trying to be then go for it.
#10
throwbAcura
Join Date: Oct 2003
Location: Newport News
Posts: 13,744
Likes: 0
Received 0 Likes
on
0 Posts