96-00 EJ Coilovers on 94-01 DC2
04-15-2012, 10:24 PM
#1
Peepee
Thread Starter
Join Date: Apr 2012
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
96-00 EJ Coilovers on 94-01 DC2
I am looking to put on stock 96-00 Shocks & Struts, to a 98 DC2. According to the research I have done, the rear LCA's on EG/DC suspension are wider (or at least the bushings if I am not mistaken). I have read that 3mm needs to be shaved off the bushing for the 96-00 Forks to fit the EG/DC LCA's in the rear. Now my actual question is, if it's the actual bushing, could I swap an EJ bushing into the EG LCA and make it fit, or is it the metal ring around the bushing itself that needs to be shaved down? Thank you for unavoidable expected flaming and criticism drag.
04-16-2012, 02:39 AM
#2
Flatulence
Join Date: Apr 2008
Location: 757
Posts: 5,460
Likes: 0
Received 0 Likes
on
0 Posts
Re: 96-00 EJ Coilovers on 94-01 DC2
It's the bushing you have to shave off. Test fit the strut first to see if you can fit it on before you cut anything
04-16-2012, 02:58 AM
#3
IM Trollin n Hatin
Join Date: Feb 2009
Location: Virginia Beach, Oceanfront
Posts: 2,356
Likes: 0
Received 0 Likes
on
0 Posts
04-16-2012, 08:01 AM
#4
Peepee
Thread Starter
Join Date: Apr 2012
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Thank you for the feedback I will do that.
Thread
Thread Starter
Forum
Replies
Last Post
justjdm
Suspension / Brakes
16
07-07-2009 06:03 PM