amp problems?
#32
holla
Thread Starter
Join Date: May 2005
Location: Va Beach
Posts: 8,179
Likes: 0
Received 0 Likes
on
0 Posts
Re: amp problems?
Originally Posted by aacjohnc
what size wire are you using for power wire and ground wire ? whatever goes in must be the same size going out on wire size
#33
holla
Thread Starter
Join Date: May 2005
Location: Va Beach
Posts: 8,179
Likes: 0
Received 0 Likes
on
0 Posts
Re: amp problems?
Originally Posted by Hunter300zx
are you "messing" with the remote wire at the amp terminal or behind the radio? if behind the radio, then you did a bad job splicing the two together. if available solder the wires together. if at the amp terminal. check to make sure that when you tightened the screw you didnt pinch / cut the wire.
yes its behind the radio, i got them good right now, at first i had them in one of those wire twister things
#34
for alarms/rmt-strts
Join Date: Aug 2004
Location: pensacola, FML FL
Posts: 2,320
Likes: 0
Received 0 Likes
on
0 Posts
Re: amp problems?
wire twister things? as in for house electronics? i wouldnt reccomend using those BUTT CONNECTORS work the best and are professional used, the twists are not made for cars at all..they may be acceptable but its not a very good connection, next time take it to a shop or a professional, also this might be a reason u have that whining noise coming from a speaker..bad connections
#35
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: amp problems?
Those wire twister things are NOT for STRANDED WIRE! They are for solid conductor home wiring only. They shouldn't be used anywhere near your car. Period.
Use butt splices or crimp caps, or better yet, solder it.
Use butt splices or crimp caps, or better yet, solder it.
#36
holla
Thread Starter
Join Date: May 2005
Location: Va Beach
Posts: 8,179
Likes: 0
Received 0 Likes
on
0 Posts
Re: amp problems?
Originally Posted by Fabrik8
Those wire twister things are NOT for STRANDED WIRE! They are for solid conductor home wiring only. They shouldn't be used anywhere near your car. Period.
Use butt splices or crimp caps, or better yet, solder it.
Use butt splices or crimp caps, or better yet, solder it.
i got them taped right now and its fine, but im thinking about this...
would it work if i took a switch, basic on-off switch, and split my remote wire and put one end on each terminal on the switch...would it make it so i can flip it and make the bass turn on and off or not?? everyone i've talked to doesnt see any problem in it and thinks it should work
#37
holla
Thread Starter
Join Date: May 2005
Location: Va Beach
Posts: 8,179
Likes: 0
Received 0 Likes
on
0 Posts
Re: amp problems?
Originally Posted by Fabrik8
Those wire twister things are NOT for STRANDED WIRE! They are for solid conductor home wiring only. They shouldn't be used anywhere near your car. Period.
Use butt splices or crimp caps, or better yet, solder it.
Use butt splices or crimp caps, or better yet, solder it.
i got them taped right now and its fine, but im thinking about this...
would it work if i took a switch, basic on-off switch, and split my remote wire and put one end on each terminal on the switch...would it make it so i can flip it and make the bass turn on and off or not?? everyone i've talked to doesnt see any problem in it and thinks it should work
#38
corona connessuer
Join Date: Nov 2002
Location: GUAM
Posts: 3,425
Likes: 0
Received 0 Likes
on
0 Posts
Re: amp problems?
Originally Posted by j4k3
i got them taped right now and its fine, but im thinking about this...
would it work if i took a switch, basic on-off switch, and split my remote wire and put one end on each terminal on the switch...would it make it so i can flip it and make the bass turn on and off or not?? everyone i've talked to doesnt see any problem in it and thinks it should work
would it work if i took a switch, basic on-off switch, and split my remote wire and put one end on each terminal on the switch...would it make it so i can flip it and make the bass turn on and off or not?? everyone i've talked to doesnt see any problem in it and thinks it should work
#40
for alarms/rmt-strts
Join Date: Aug 2004
Location: pensacola, FML FL
Posts: 2,320
Likes: 0
Received 0 Likes
on
0 Posts
Re: amp problems?
stop ghetto rigging shit, buy a cd player with subwoofer controls...there not even really expensive anymore used, u can pick up a pretty good one for around 75 bucks..im sellin one now for 80 actually