B16 or LS???
#11
i went through the same decision...i got a 97 ls and wished i had gotten a b16. Unless you have money to turbo the ls right off hand..you wont be too satisfyed with the ls..but maybe that was just me missing vtec after going from a type r to ls hatch. the b16 isnt as tourqey but its still gonna be quicker and a good highway car.
#13
Kimchee Wiggler
Join Date: Nov 2002
Location: Morrisville NC
Posts: 1,283
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by kenbdSi
B16 first choice. Make more power with less boost. Better flowing head, better rod stroke ratio,etc... LS/Vtec is a good choice if done the RIGHT way. Which in turn would probally cost more money than the b16. I would say a b16 with a b18c1(gsr) bottom end. With the b16 head on that block itwould yield the C/R to about 9:8:1 or 9:5:1 something like that. You get a bigger displacement, much better rod to stroke ratio and a better flowing head.
B16 first choice. Make more power with less boost. Better flowing head, better rod stroke ratio,etc... LS/Vtec is a good choice if done the RIGHT way. Which in turn would probally cost more money than the b16. I would say a b16 with a b18c1(gsr) bottom end. With the b16 head on that block itwould yield the C/R to about 9:8:1 or 9:5:1 something like that. You get a bigger displacement, much better rod to stroke ratio and a better flowing head.
#14
Kimchee Wiggler
Join Date: Nov 2002
Location: Morrisville NC
Posts: 1,283
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by kenbdSi
B16 first choice. Make more power with less boost. Better flowing head, better rod stroke ratio,etc... LS/Vtec is a good choice if done the RIGHT way. Which in turn would probally cost more money than the b16. I would say a b16 with a b18c1(gsr) bottom end. With the b16 head on that block itwould yield the C/R to about 9:8:1 or 9:5:1 something like that. You get a bigger displacement, much better rod to stroke ratio and a better flowing head.
B16 first choice. Make more power with less boost. Better flowing head, better rod stroke ratio,etc... LS/Vtec is a good choice if done the RIGHT way. Which in turn would probally cost more money than the b16. I would say a b16 with a b18c1(gsr) bottom end. With the b16 head on that block itwould yield the C/R to about 9:8:1 or 9:5:1 something like that. You get a bigger displacement, much better rod to stroke ratio and a better flowing head.
#16
Registered Member
Join Date: Nov 2002
Location: hampton
Posts: 760
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Boostfed
Actually the CR would be about 9.7-9.8ish according to C-Speedracing's websites Compression Ratio calculator with B18C block and B16A head. ALso incorrect is the rod to stroke ratio being better in the B18C motor, the B16A has a rod to stroke ratio of 1.74:1 , B18C is 1.58:1 and the wrost Rod to stroke ratio is the LS/B20C/Z at 1.54 rod to stroke ratio.
Actually the CR would be about 9.7-9.8ish according to C-Speedracing's websites Compression Ratio calculator with B18C block and B16A head. ALso incorrect is the rod to stroke ratio being better in the B18C motor, the B16A has a rod to stroke ratio of 1.74:1 , B18C is 1.58:1 and the wrost Rod to stroke ratio is the LS/B20C/Z at 1.54 rod to stroke ratio.
#17
Kimchee Wiggler
Join Date: Nov 2002
Location: Morrisville NC
Posts: 1,283
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by kenbdSi
I knew it was somewhere in the that range(couldnt remember off hand). I dont think I said the b18c had a better rod to stroke than the b16a.
I knew it was somewhere in the that range(couldnt remember off hand). I dont think I said the b18c had a better rod to stroke than the b16a.
#19
E for Engourged.
Join Date: Nov 2002
Location: oDU.
Posts: 3,512
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 99slowlst
someone said it best in another thread, dont waste your money on a b16....theyre still torqueless pieces of shit.
someone said it best in another thread, dont waste your money on a b16....theyre still torqueless pieces of shit.
#20
ya if you want a fast engine...use the ls bottom end build for turbo and use the b16 head and don't use the v-tec...it will run better low end with the torque of the ls and strong top-end with the b16 head...thats just my opinion.