b20 swap into eg ?
#1
DaveMcDirt
Thread Starter
Join Date: Nov 2002
Location: franklin
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
b20 swap into eg ?
me and my boy are doin our first honda engine swap and we have some questions,its a b20b from a 97 crv goin into a 95 ex coupe...heres my list of questions,any help is greatly appreciated!
1)what axles do we use?(94-00 teg?)
2)what distributor do we use?
3)will the hood still have clearence to latch down
4)will an integra bottom transmission mount work?
5)whats the best injectors to use if we go turbo?(t3/t4)
were open to any advice,dont rag on us too hard for being dumb about all this shit,like i said its our first swap!
1)what axles do we use?(94-00 teg?)
2)what distributor do we use?
3)will the hood still have clearence to latch down
4)will an integra bottom transmission mount work?
5)whats the best injectors to use if we go turbo?(t3/t4)
were open to any advice,dont rag on us too hard for being dumb about all this shit,like i said its our first swap!
#2
Re: b20 swap into eg ?
me and my boy are doin our first honda engine swap and we have some questions,its a b20b from a 97 crv goin into a 95 ex coupe...heres my list of questions,any help is greatly appreciated!
1)what axles do we use?(94-00 teg?)
2)what distributor do we use?
3)will the hood still have clearence to latch down
4)will an integra bottom transmission mount work?
5)whats the best injectors to use if we go turbo?(t3/t4)
were open to any advice,dont rag on us too hard for being dumb about all this shit,like i said its our first swap!
1)what axles do we use?(94-00 teg?)
2)what distributor do we use?
3)will the hood still have clearence to latch down
4)will an integra bottom transmission mount work?
5)whats the best injectors to use if we go turbo?(t3/t4)
were open to any advice,dont rag on us too hard for being dumb about all this shit,like i said its our first swap!
#3
I <3 My DSM
Join Date: Jul 2004
Location: Va Beach
Posts: 2,104
Likes: 0
Received 0 Likes
on
0 Posts
Re: b20 swap into eg ?
if your on a budget, just use integra Ls mounts, but if possible, go hasport. injectors i would say the stock DSM turbo injectors(if you boost it). i would also consider a better I/M like skunk 2 or victor x. if you put a vtec head on it, than you will have the slightest little clearance issue, in the bottom right (or top right, i forget) part of the valve cover, but after a few hood closes, you will be fine...lol. you will also need integra axels or better ie. gator ..etc. you will need integra shift linkage as well (THE FULL LINKAGE, not just one of the two pieces...) and i believe an integra distributor.
#4
TreblicTunedFTW!!
Join Date: Nov 2006
Location: DeadFRED
Posts: 1,758
Likes: 0
Received 0 Likes
on
0 Posts
Re: b20 swap into eg ?
Hope this helps somewhat.
#5
Re: b20 swap into eg ?
me and my boy are doin our first honda engine swap and we have some questions,its a b20b from a 97 crv goin into a 95 ex coupe...heres my list of questions,any help is greatly appreciated!
1)what axles do we use?(94-00 teg?)
2)what distributor do we use?
3)will the hood still have clearence to latch down
4)will an integra bottom transmission mount work?
5)whats the best injectors to use if we go turbo?(t3/t4)
were open to any advice,dont rag on us too hard for being dumb about all this shit,like i said its our first swap!
1)what axles do we use?(94-00 teg?)
2)what distributor do we use?
3)will the hood still have clearence to latch down
4)will an integra bottom transmission mount work?
5)whats the best injectors to use if we go turbo?(t3/t4)
were open to any advice,dont rag on us too hard for being dumb about all this shit,like i said its our first swap!
2. You can do a mixture of distributors to make it work. The reason is that you might get an OBD2 motor and the distributor plug will not plug into the civic harness. I always take the guts from the original car and put them into the new engines distributor (makes it plug and play).
3. the clearance will be fine.
4. You can use all of the civic mounts except for the front lower trans mount that bolts to the underside of the frame. Also to retain A/C you will need to use the A/C bracket from a Del Sol with the DOHC engine. You will need the T bracket off of a 94-01 integra (rear trans mount bracket) Also you should change the front engine mount bracket to one from an integra (the bracket sticking out of the timing cover).
5. Will depend on the power that you are trying to make.
#6
Its Lightish Red
Join Date: Oct 2005
Location: Jacksonville, FL
Posts: 2,755
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered Member
Join Date: Sep 2008
Location: locked and secure!!
Posts: 695
Likes: 0
Received 0 Likes
on
0 Posts
Re: b20 swap into eg ?
#9