crome help
10-01-2009 | 09:28 PM
#2
Racetracks
Joined: Nov 2002
Posts: 15,668
Likes: 0
From: How long is a piece of string?
Re: crome help
There should be a check box or something in Crome somewhere, along with a few parameter settings. If it's a speed-based 2 step it will have an speed threshold, etc. Look around, you'll find it.
You'll need to burn the new file to the chip obviously, and load the file that's already on the chip into Crome if you don't already have it. It's the same process that you have to do to edit the maps or whatever in Crome. I don't know what your relative experience level is, sorry if I'm making you roll your eyes or something like that.
And anti-lag is completely different than a 2 step rev limit. They're not the slightest bit related. One is a massive ignition timing retard to keep a turbo spooled during low throttle, the other one is a secondary rev limit that is only enabled below a preset speed. Not the same thing.
You'll need to burn the new file to the chip obviously, and load the file that's already on the chip into Crome if you don't already have it. It's the same process that you have to do to edit the maps or whatever in Crome. I don't know what your relative experience level is, sorry if I'm making you roll your eyes or something like that.
And anti-lag is completely different than a 2 step rev limit. They're not the slightest bit related. One is a massive ignition timing retard to keep a turbo spooled during low throttle, the other one is a secondary rev limit that is only enabled below a preset speed. Not the same thing.
10-02-2009 | 08:16 AM
#3
Thread Starter
Banned
Joined: Jul 2009
Posts: 736
Likes: 0
Re: crome help
There should be a check box or something in Crome somewhere, along with a few parameter settings. If it's a speed-based 2 step it will have an speed threshold, etc. Look around, you'll find it.
You'll need to burn the new file to the chip obviously, and load the file that's already on the chip into Crome if you don't already have it. It's the same process that you have to do to edit the maps or whatever in Crome. I don't know what your relative experience level is, sorry if I'm making you roll your eyes or something like that.
And anti-lag is completely different than a 2 step rev limit. They're not the slightest bit related. One is a massive ignition timing retard to keep a turbo spooled during low throttle, the other one is a secondary rev limit that is only enabled below a preset speed. Not the same thing.
You'll need to burn the new file to the chip obviously, and load the file that's already on the chip into Crome if you don't already have it. It's the same process that you have to do to edit the maps or whatever in Crome. I don't know what your relative experience level is, sorry if I'm making you roll your eyes or something like that.
And anti-lag is completely different than a 2 step rev limit. They're not the slightest bit related. One is a massive ignition timing retard to keep a turbo spooled during low throttle, the other one is a secondary rev limit that is only enabled below a preset speed. Not the same thing.
10-05-2009 | 06:31 PM
#8
JAY SPEC
Joined: Sep 2003
Posts: 3,170
Likes: 0
From: Chesapeake/ODU
Re: crome help
Disable eld. ( ****never mind I was totally wrong****)
And your 2 step feature is to be able to obviously induce full throttle before actually reving the engine on launch. Helps with being able to launch at a specific rpm that works best with your setup. Tires/ suspension/ power band etc.
And your 2 step feature is to be able to obviously induce full throttle before actually reving the engine on launch. Helps with being able to launch at a specific rpm that works best with your setup. Tires/ suspension/ power band etc.
Last edited by 00civichatch; 10-06-2009 at 11:12 AM.