Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

d15b clutch questions

Thread Tools
 
Old 01-27-2010, 08:27 PM
  #1  
Registered Member
Thread Starter
 
jdmchef's Avatar
 
Join Date: Nov 2009
Location: gloucester
Posts: 265
Likes: 0
Received 0 Likes on 0 Posts
jdmchef jdmchef
Default d15b clutch questions

ok so the motor was swapped and it has an aftermarket stage one clutch but not sure of the brand but it has yellow springs. but when i let off the clutch in first gear there is a squeak. almost sounds like the clutch is slipping but not sure. if i get on the car and shift into to second it doesnt slip though. so i geuss what i am asking is it the clutch slipping or is it something else. and if it is does any one know of any websites were i can get a clutch and flywheel kit.( keep in mind the tranny doesnt have the lower three bolts due to the dumb ass who swapped the motor in the car, and if any one has any bolts id appreciate it if they would sell them or tell me were i could get them. it also does it when car is warm or at a cold temp. any ifo appreciated
jdmchef is offline  
Old 01-28-2010, 03:45 PM
  #2  
Registered Member
 
backtoarms's Avatar
 
Join Date: Oct 2009
Location: Fredericksburg, VA
Posts: 913
Likes: 0
Received 0 Likes on 0 Posts
backtoarms backtoarms backtoarms backtoarms backtoarms backtoarms backtoarms
Default Re: d15b clutch questions

I would DEFINITELY get those three bolts. And hope to God he put the dowel pins back in where the transmission meets the block. Makes you wonder how many other bolts he left out.
backtoarms is offline  
Old 01-28-2010, 05:13 PM
  #3  
Registered Member
Thread Starter
 
jdmchef's Avatar
 
Join Date: Nov 2009
Location: gloucester
Posts: 265
Likes: 0
Received 0 Likes on 0 Posts
jdmchef jdmchef
Default Re: d15b clutch questions

Well the pins were put back in the block and i also had the tranny swapped out from the original i just need the three bolt. Do you know were i can pick them up at
jdmchef is offline  
Old 01-28-2010, 05:58 PM
  #4  
Registered Member
 
BallinthaEF's Avatar
 
Join Date: Nov 2005
Posts: 1,335
Likes: 0
Received 0 Likes on 0 Posts
BallinthaEF BallinthaEF BallinthaEF
Default Re: d15b clutch questions

My brother had a act clutch that mad the same noise
BallinthaEF is offline  
Old 01-28-2010, 06:04 PM
  #5  
Registered Member
Thread Starter
 
jdmchef's Avatar
 
Join Date: Nov 2009
Location: gloucester
Posts: 265
Likes: 0
Received 0 Likes on 0 Posts
jdmchef jdmchef
Default Re: d15b clutch questions

did it end up going bad??? what ended up being the problem? but yeah im in need of some bolts its at the bottom were the metal shield bolts up.
jdmchef is offline  
Old 01-28-2010, 06:55 PM
  #6  
Registered Member
 
backtoarms's Avatar
 
Join Date: Oct 2009
Location: Fredericksburg, VA
Posts: 913
Likes: 0
Received 0 Likes on 0 Posts
backtoarms backtoarms backtoarms backtoarms backtoarms backtoarms backtoarms
Default Re: d15b clutch questions

Originally Posted by jdmchef
Well the pins were put back in the block and i also had the tranny swapped out from the original i just need the three bolt. Do you know were i can pick them up at
You could probably either go to any junkyard and pull them out, or take another one out of the tranny and match it up at autozone or home depot or something. But, I'd suggest going to a junkyard being that they're not all the same size in the tranny. Same thread pitch, but different lengths.
backtoarms is offline  
Old 01-29-2010, 06:27 AM
  #7  
Registered Member
Thread Starter
 
jdmchef's Avatar
 
Join Date: Nov 2009
Location: gloucester
Posts: 265
Likes: 0
Received 0 Likes on 0 Posts
jdmchef jdmchef
Default Re: d15b clutch questions

well im pretty sure its the clutch going out. well it doesnt slip to drive just lets out at the top and it sqeaks. any input. its also a hydro tranny
jdmchef is offline  
Old 01-29-2010, 06:36 AM
  #8  
Registered Member
 
toherekn0wswhen's Avatar
 
Join Date: Sep 2008
Posts: 124
Likes: 0
Received 0 Likes on 0 Posts
toherekn0wswhen has disabled reputation
Default Re: d15b clutch questions

or you could just get rid of the dook d series and get a motor that actually makes more than 97 hp
toherekn0wswhen is offline  
Old 01-29-2010, 07:56 AM
  #9  
Registered Member
 
backtoarms's Avatar
 
Join Date: Oct 2009
Location: Fredericksburg, VA
Posts: 913
Likes: 0
Received 0 Likes on 0 Posts
backtoarms backtoarms backtoarms backtoarms backtoarms backtoarms backtoarms
Default Re: d15b clutch questions

Originally Posted by toherekn0wswhen
or you could just get rid of the dook d series and get a motor that actually makes more than 97 hp
Hey! It's more if it has Skunk2 stickers and neons! My car has shaved emblems, which I'm pretty sure adds like 25hp. :P
backtoarms is offline  
Old 01-29-2010, 10:07 AM
  #10  
Racetracks
 
Fabrik8's Avatar
 
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes on 0 Posts
Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8
Default Re: d15b clutch questions

Is this a squeal when you start to apply pressure to the clutch, like the throwout bearing going bad?
Fabrik8 is offline  


Quick Reply: d15b clutch questions



All times are GMT -8. The time now is 11:36 PM.