1slowEG

Hey guys i got a issue that needs to be resolved YESTERDAY haha.....

Ok car was driving fine i parked it and next morning she wouldnt start i heard no fuel pump

so i check main relay and im getting 2 clicks
so i checked ALL the fuses and they are all good
so i checked the ACG and it was also good
I checked for power at plug on pump and it has 12 volts for 3 seconds and shuts off like it should
SO i install a brand new pump and STILL NOTHING!!!
I pulled main relay and its getting power to the wires it should to operate pump

Soooo help what else could it possibly be???

IF IM NOT ON VAdriven PLEASE TEXT 1-434-566-6426 THANKS

TongWoo

I say distributor.

dc5ek

Faulty pump maybe.its not unheard of to get a new pump and it be bad.

1slowEG

put brand new pump on battery and it whirls good!! and what would dizzy have to do with fuel pump cutting on??....and also the dizzys hot is getting power!!!

dirty c

transistor burnt up in a obd1 pr4 ecu i had and my car did the same thing. have another computer try that.

1slowEG

ok i will try and for the future guys i failed to mention swaps a B16a2 with p28 chipped ecu!!!

Fabrik8

Check for power between the pump connector and the chassis. The ground wire might be corroded or fatigued. If you're seeing the power for 3 seconds when it should be priming, then the ECU is working properly.

It's possible that the fuse is partially blown, or there is some other problem where the current is getting restricted. If this is the case, you'd see proper voltage if the pump is not connected, but things would go wrong with a load on it.

1slowEG

i put a hot wire on my pump and car started and ran fine so i took main relay and beat the hell out of it and now it dont click at all and it wont even start with hot to the pump.....

Victum

get another relay

1slowEG

so getting another relay should fix it all your saying?