high comp boost
#1
Registered Member
Thread Starter
Join Date: Feb 2008
Location: Woodbridge
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
high comp boost
Hey I have a b16 in my ef with 12:1 comp. pistons and I am currently building a b16 low comp bottom end. And I want to boost it with the 12:1 comp. pistons in it to see what it will put down. Let me know if anyone has done this and what will it put down. And is there anything major that could go wrong.
#4
Body In Trunk.
Join Date: Feb 2005
Location: Glen Allen, VA.
Posts: 2,856
Likes: 0
Received 0 Likes
on
0 Posts
Re: high comp boost
Hey I have a b16 in my ef with 12:1 comp. pistons and I am currently building a b16 low comp bottom end. And I want to boost it with the 12:1 comp. pistons in it to see what it will put down. Let me know if anyone has done this and what will it put down. And is there anything major that could go wrong.
#9
VAdriven Sponsor
Join Date: May 2005
Location: Virginia Beach
Posts: 4,390
Likes: 0
Received 0 Likes
on
0 Posts
Re: high comp boost
what gas do u plan on running? its no so much the compression, its going to be the end cylinder press that will cause problems if any, im our race car i run a 11.5 pistons but i didnt see much gain over a 10.0 like 20 hp, your not so much make more power, you will make the same power on less boost, to a point, can u post more details on the setup?
#10
Re: high comp boost
Hey I have a b16 in my ef with 12:1 comp. pistons and I am currently building a b16 low comp bottom end. And I want to boost it with the 12:1 comp. pistons in it to see what it will put down. Let me know if anyone has done this and what will it put down. And is there anything major that could go wrong.