High Power D16z6
#22
Re: High Power D16z6
lol at port and polish the engine. if you want a high power d, you need to sleeve the block, get some vitara low comp pistons, eagle rods, balance the bottom end, port and polish the head, a good turbo cam, adjustable cam gear, vavles, springs and retainers, some big injectors, and a bigger fuel pump. I think you need to do some more searching and get a little more knowledge before you start building a motor.
#24
Re: High Power D16z6
with 250-300whp you will not have a beast by any means or even a fast car. your car will just be quick to some people. it's 2010 bro if you aint shooting for 400+ you aint doing much. people are making 250- 300 all day on the stock bottom end all the time now days. all you need is a decent size turbo, vitara's, eagles or fjt i beams rods, arp headstuds, bisi 2.4 cam, valve springs, and a good tuner. o and possibly a water/meth kit if you want to be really safe without using race gas for higher boost
#25
Re: High Power D16z6
Complete Vitara bottom end kit right here http://fjdistributors.com/product_in...roducts_id=564 or you can just get the Vitara piston's and I Beam rods by themselves.
But please do some research. You sound like you don't know what you're doing.
But please do some research. You sound like you don't know what you're doing.
Last edited by Hicky; 06-14-2010 at 09:16 PM.
#27
Re: High Power D16z6
Complete Vitara bottom end kit right here http://fjdistributors.com/product_in...roducts_id=564 or you can just get the Vitara piston's and I Beam rods by themselves.
But please do some research. You sound like you don't know what you're doing.
But please do some research. You sound like you don't know what you're doing.
#28
Dickbutt #peentip
Join Date: Jan 2007
Location: Virginia Beach
Posts: 10,256
Likes: 0
Received 0 Likes
on
0 Posts
#29
#30
Re: High Power D16z6
Here's a simple one that could inform us of your knowledge or lack there of.
Which afr (air fuel ratio) is leaner(less fuel) 13 or 8?
edit: If that's too hard, then answer this. Where does your muffler bearing go?
Which afr (air fuel ratio) is leaner(less fuel) 13 or 8?
edit: If that's too hard, then answer this. Where does your muffler bearing go?
Last edited by 341am; 06-15-2010 at 01:38 PM.