how to wire vtec
11-17-2008, 05:56 PM
#2
baller/dickbutt#69
Join Date: Nov 2002
Location: hampton
Posts: 16,059
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to wire vtec
you take the two wires off the v tec solenoid....you ground the one wire to the battery and hook the other wire up to the remote wire on your stereo....then you can control when v tec kicks in my adjusting your volume
11-17-2008, 06:07 PM
#3
Registered Member
Join Date: Oct 2008
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to wire vtec
11-17-2008, 06:11 PM
#4
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to wire vtec
11-17-2008, 06:30 PM
#6
やくざに成りたい
Join Date: Nov 2004
Location: virginia beach
Posts: 2,174
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to wire vtec
Last edited by atmdc; 11-17-2008 at 06:40 PM. Reason: ninja edit
11-17-2008, 06:34 PM
#7
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to wire vtec
The gist is that you need to wire up the VTEC pressure switch and the VTEC solenoid to the ECU. Therefore you need to use a VTEC ECU, which has the correct hardware for those two things. A VTEC ECU will also have a program with two sets of fuel and ignition maps, and the ECU will switch from one set of maps to the other when it engages VTEC.
You can also use a VTEC controller, which has fuel correction tables that it uses when it engages VTEC, but you'll get usually get much better results and a better running engine with a stock VTEC ECU.
You don't ask for reps, reps are awarded. No rep begging.
You can also use a VTEC controller, which has fuel correction tables that it uses when it engages VTEC, but you'll get usually get much better results and a better running engine with a stock VTEC ECU.
