i did a compression test on my jdm h22
#1
ALL ABOUT THE TORQUE
Thread Starter
Join Date: Sep 2005
Location: VA
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
i did a compression test on my jdm h22
cylinders all checked a lil over 270 psi across the board
the question I have is what's wrong with the plug in this picture?
2 of them were like this the other 2 weren't as bad the plugs are less then a year old
also im using the ngk zfr5f should I change them to platinum?
thanks
crapy cell phone pics sorry
the question I have is what's wrong with the plug in this picture?
2 of them were like this the other 2 weren't as bad the plugs are less then a year old
also im using the ngk zfr5f should I change them to platinum?
thanks
crapy cell phone pics sorry
#8
management
Join Date: Aug 2009
Location: choosing seats
Posts: 5,412
Likes: 0
Received 0 Likes
on
0 Posts
Re: i did a compression test on my jdm h22
i dont see how your motor is reading 270+ across the board. i think you did something wrong. oh and buy some more spark plugs.
#9
ALL ABOUT THE TORQUE
Thread Starter
Join Date: Sep 2005
Location: VA
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Re: i did a compression test on my jdm h22
the motor isn't stock build. the motor is sleeved and 12.1 compression pistons. the plugs look like there is corrosion on them and it also looks like compression is between the porcelain and where the metal is I will take better pics when I get off of work
I wonna know whey the plugs have that on it and there three months old
the car seems to be running a lil weird lower idle and not as good fuel millage
also should I use platinum plugs ?
I wonna know whey the plugs have that on it and there three months old
the car seems to be running a lil weird lower idle and not as good fuel millage
also should I use platinum plugs ?