bubbax

i got a 91 dx hatch with stock d15 motor i got a intake manifold off a eg from a friend but im not sure what all to do i got everythinmg just about hooked up accept for the wire harness i dont really understand, what do i have to do to get the sensors and enjectors all hooked up so anyone that could help me or could tell me what i need or need to do would be much appreciated thanks....

bubbax

oh also on the valve cover one of the four nuts that go on is broken off is ok to drive with one missing? just wondering?

atmdc

valve cover should be fine, might leak some oil there. but for the wiring are you swapping dpfi to mpfi?

bubbax

ya what all should i do about the injectors and and sensors cause thats about all i need to do

atmdc

http://www.angelfire.com/d20/hcivic88/dx-siwiring.html

bubbax

thanks..

atmdc

search on google for dpfi to mpfi and look at as many tutorials until you find the one that makes the most sense to you. its kinda hard to explain how to do it unless you see it. good luck

JAvenger

http://hondaswap.com/swap-articles/d...writeup-49557/

bubbax

ya everything makes sense somewhat i just suck with wiring but ill do that research alot then try n not screw anything up

atmdc

Wiring isn't so bad. Just give yourself a whole day to do it if you want it to look clean. Use shrinkwrap. Different color wires. Make yourself a chart on paper of what colors go where. Use electrical tape to bundle the wires and use conduit to make it look stock. Or you can run it into the stock harness which is more work but looks even better. Last but not least check, double check and check a third time when wiring so it saves you a headache later.