NEED TO KNOW TONIGHT - Acura/Honda bolt size!!
#1
Registered member
Thread Starter
Join Date: Jul 2007
Posts: 960
Likes: 0
Received 0 Likes
on
0 Posts
NEED TO KNOW TONIGHT - Acura/Honda bolt size!!
Hey guys, my problem is with my transmission mount on the passenger side (every engine from d to b should be the same part number but to be more specific i have a 1997 acura integra gsr in a 1997 ej8). i noticed that 2 of the 3 bolts that hold the transmission to the mount were missing after i went on a long car ride to the beach last week. i need to know what size the bolt is so i can heli coil it. i have searched and googled but i can only find that its a 12x56.7(or 55.7 depending on your source) but i need to know the pitch!
and m12 seems to be way to small, so can someone please clarify! i need to know this answer by tonight so i can buy a heli coil kit/bit tomorrow morning before work so i can fix my car before this coming week!
thanks in advance!
CLIFF NOTES:
Car: 1997 Acura Integra GSR
Need: Bolt size for passenger transmission mount - the 3 bolts that actually go through the mount and into the transmission
What for: Heli coil kit
and m12 seems to be way to small, so can someone please clarify! i need to know this answer by tonight so i can buy a heli coil kit/bit tomorrow morning before work so i can fix my car before this coming week!
thanks in advance!
CLIFF NOTES:
Car: 1997 Acura Integra GSR
Need: Bolt size for passenger transmission mount - the 3 bolts that actually go through the mount and into the transmission
What for: Heli coil kit
#2
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: NEED TO KNOW TONIGHT - Acura/Honda bolt size!!
An M12 bolt is almost a 1/2 inch diameter (25.4mm per inch). That's too small?
You realize that bolts are sized by their threaded diameter, not the size of the head, right?
It's either going to be a M10 or M12 bolt, I can't remember which, but either way it's going to be a 1.25mm pitch. There are very few common metric thread pitches, so you're lucky.
You realize that bolts are sized by their threaded diameter, not the size of the head, right?
It's either going to be a M10 or M12 bolt, I can't remember which, but either way it's going to be a 1.25mm pitch. There are very few common metric thread pitches, so you're lucky.
Last edited by Fabrik8; 06-20-2009 at 06:56 PM.
#3
Registered member
Thread Starter
Join Date: Jul 2007
Posts: 960
Likes: 0
Received 0 Likes
on
0 Posts
Re: NEED TO KNOW TONIGHT - Acura/Honda bolt size!!
alright so its a m12, still gota figure out the pitch.
for some reason it just didnt sound right, idk i think i keep confusing m12 with 12mm in my head. my bad, thats what 3 days of 12 hour shifts do to you. but thanks for figuring out half the puzzle
for some reason it just didnt sound right, idk i think i keep confusing m12 with 12mm in my head. my bad, thats what 3 days of 12 hour shifts do to you. but thanks for figuring out half the puzzle
#4
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: NEED TO KNOW TONIGHT - Acura/Honda bolt size!!
M12 is 12mm. Same thing. M is for metric, 12 is for the diameter in mm. You're looking for M12x1.25 bolts of whatever length you need.
#6
Registered member
Thread Starter
Join Date: Jul 2007
Posts: 960
Likes: 0
Received 0 Likes
on
0 Posts
Re: NEED TO KNOW TONIGHT - Acura/Honda bolt size!!
your a genius and im a retard. haha, thanks man.. i was also confusing the whole diameter with the head versus the diameter of the actual bolt. nooow everything makes sense. your the shit +rep haha
#7
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: NEED TO KNOW TONIGHT - Acura/Honda bolt size!!
Make sure you double check what it is, I can't remember if it's M10 or M12 so you still need to find that out. Google just found this which may help: http://www.hasport.com/tech/installs/EGJ1.pdf
#8
Registered member
Thread Starter
Join Date: Jul 2007
Posts: 960
Likes: 0
Received 0 Likes
on
0 Posts
Re: NEED TO KNOW TONIGHT - Acura/Honda bolt size!!
"M12 x 1.25 x 55mm Bolt" says hasport
90380-SR3-000 honda part number for the actual bolt/stud 12X57.6
90380-SR3-000 honda part number for the actual bolt/stud 12X57.6
Last edited by enot767; 06-20-2009 at 08:00 PM.
#10
baller/dickbutt#69
Join Date: Nov 2002
Location: hampton
Posts: 16,059
Likes: 0
Received 0 Likes
on
0 Posts
Re: NEED TO KNOW TONIGHT - Acura/Honda bolt size!!
an 3/4 to inch bolt should be fine...and if you have one bolt left...remove that bolt and go to advance and say hey...i need two of these...not awfully hard