Need some help (SR20DET)
#1
Registered Member
Thread Starter
Join Date: Sep 2007
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
Need some help (SR20DET)
I just upgraded my injectors, turbo, and turbo manifold on my car, and I have an SAFC 2 for tuning. Everything seems fine except when I come to a stop, the rpm drops and sometimes stalls the car. I tried messing with the dec. air on the afc, but nothing seems to be working. Anyone know what I can do? Or anyone that can help/tune it for me in the central area?
Thanks,
Alex
Thanks,
Alex
#2
Re: Need some help (SR20DET)
that is definatly not the best way to tune with bigger injectors and stuff in place. I would recomend ditching that and getting at least a cheap daughter board style rom chip ecu so you can have a decent tune made. Or get a power fc. Check on a calum realtime ecu if your low on funds. Calum can be found on sr20forums.
#4
Registered Member
Thread Starter
Join Date: Sep 2007
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
#5
Registered Member
Join Date: Nov 2008
Location: NorVA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need some help (SR20DET)
i had a sr in my s13 for almost three years so i can safely say get rid of the SAFC and get a proper tune. either rom tune or emanage ult or PowerFC. If you wanna upgrade im selling my Greddy emanage ult with harness and all instructions
#6
Registered Member
Join Date: Dec 2006
Location: sleeping in my car
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need some help (SR20DET)
that is definatly not the best way to tune with bigger injectors and stuff in place. I would recomend ditching that and getting at least a cheap daughter board style rom chip ecu so you can have a decent tune made. Or get a power fc. Check on a calum realtime ecu if your low on funds. Calum can be found on sr20forums.
#7
Registered Member
Join Date: Dec 2006
Location: sleeping in my car
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need some help (SR20DET)
i only suggested this because calum is a bit backed up right now.
#9
Registered Member
Thread Starter
Join Date: Sep 2007
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need some help (SR20DET)
how much is an enthalpy tune?
and enthalpy tune is done with the factory ecu right?
and is running on an SAFC good enough for now... until I can get enough money to get the tune? - 2 months ish
and yeah it's a 240
and enthalpy tune is done with the factory ecu right?
and is running on an SAFC good enough for now... until I can get enough money to get the tune? - 2 months ish
and yeah it's a 240
#10
Registered Member
Thread Starter
Join Date: Sep 2007
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need some help (SR20DET)