offset wheels on a 98 4 door
#1
Registered Member
Thread Starter
Join Date: Mar 2007
Location: Gloucester,VA
Posts: 2,445
Likes: 0
Received 0 Likes
on
0 Posts
offset wheels on a 98 4 door
Ok so I'm looking to buy some wheels with a offset. Like a 15x8 +15 or +10 offset or a 15x7 + 25 offset. I was wondering if I would run into any problems with the fitment of the wheels rubbing on anything. Because my boy had a set of Rota RBs on his EK coupe and he had to grind down something to make them fit in the rear. I'm also going to be running a camber kit if that info helps. Any positive comments/help would be greatly appreciated. Thanks
Last edited by chevylowrider21; 12-10-2009 at 02:10 PM.
#3
Registered Member
Thread Starter
Join Date: Mar 2007
Location: Gloucester,VA
Posts: 2,445
Likes: 0
Received 0 Likes
on
0 Posts
#4
Re: offset wheels on a 98 4 door
hmmm. well a 15x8 +10 is gonna poke out. if it were me, id go with a 15x7 +15 up front and a 15x8 0 offset or +10 in rear with a 195-45-r15 and dump the shit out of it. get wishihadasilvia to roll the fenders and you should be good to go. ask bwell, he is the wheels guru
#5
Registered Member
Thread Starter
Join Date: Mar 2007
Location: Gloucester,VA
Posts: 2,445
Likes: 0
Received 0 Likes
on
0 Posts
Re: offset wheels on a 98 4 door
hmmm. well a 15x8 +10 is gonna poke out. if it were me, id go with a 15x7 +15 up front and a 15x8 0 offset or +10 in rear with a 195-45-r15 and dump the shit out of it. get wishihadasilvia to roll the fenders and you should be good to go. ask bwell, he is the wheels guru
Yea I was gonna get him to roll my fenders anyways. But thanks man. Jus tryin to get a good look and stance goin with my car. And yea ill get in touch with b-well. Appreciate it bro
#7
Re: offset wheels on a 98 4 door
bro you have the perfect size for a good tuck, you need your fenders rolled and cambered in with 45 series tires. your shit would look so much doper if you did that.
#8
Registered Member
Thread Starter
Join Date: Mar 2007
Location: Gloucester,VA
Posts: 2,445
Likes: 0
Received 0 Likes
on
0 Posts
Re: offset wheels on a 98 4 door
#10
Re: offset wheels on a 98 4 door
check my eg coupe thread. says bored today as title. and I cambered my wheels, (not shown in those pictures) i just cambered them 2 days ago, waiting for someone to roll my fenders, i was just saying dont go over +10. my friend has +32 15x7.5 konigs and his look good, no rollin or anything.