What yall think of 3in exhaust on a h22
#1
Registered member
Thread Starter
Join Date: Jan 2009
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
What yall think of 3in exhaust on a h22
im getting ready to redo my exhaust on my h22 should i go with 2.5 or 3in.its allmotor with type s stuff and boltons. thanks
Last edited by 1_bad_eg; 03-22-2009 at 08:12 PM.
#3
Its a Man part.
Join Date: Sep 2008
Location: Watching you from the yard
Posts: 635
Likes: 0
Received 0 Likes
on
0 Posts
Re: What yall think of 3in exhaust on a h22
Doesnt sound like your running a crazy all motor set up so there isnt any reason for a 3 inch exhaust.. 2.5 in will work just fine for what you have.
#4
da dragva kokopelli
Join Date: Oct 2004
Location: the last place you look
Posts: 8,949
Likes: 0
Received 0 Likes
on
0 Posts
Re: What yall think of 3in exhaust on a h22
a 3 inch exhaust on a relatively stock n/a motor will do nothing but cause alot of noise. i think i have seen cars lose power on the dyno with overly huge exhausts.
get a 2.5
get a 2.5
#5
green box is back!
Join Date: Oct 2005
Location: Newport News
Posts: 1,309
Likes: 0
Received 0 Likes
on
0 Posts
Re: What yall think of 3in exhaust on a h22
I mean I run a 3" dp to 2.5" exhaust for a quicker spool. Now what is your reasoning?
#6
da dragva kokopelli
Join Date: Oct 2004
Location: the last place you look
Posts: 8,949
Likes: 0
Received 0 Likes
on
0 Posts
Re: What yall think of 3in exhaust on a h22
your right, someone correct me if im wrong but, when boosted (turbo wise at least) you want the exhaust gas to exit the car/exhaust rather quickly, due to the turbo being there, and having less resistance against the fins/turbine in general. thus quicker spool etc etc. better boost overall.
a 3 inch exhaust on a stock motor really wouldnt do anything greatly better than a 2.5 really, unless you want the sound of your car to be alot louder. (not something i suggest in VA). but the BIGGER BORE, higher compression motors these use 3 inch collectors on the header, to 3 inch exhaust if one is present, due to the fact of the higher compression and the more flow. but usually have a fine tuned header (smsp, RMF, etc) because the design of the header usually keeps the right amount of backpressure wanted for the n/a build.
#7
green box is back!
Join Date: Oct 2005
Location: Newport News
Posts: 1,309
Likes: 0
Received 0 Likes
on
0 Posts
Re: What yall think of 3in exhaust on a h22
your right, someone correct me if im wrong but, when boosted (turbo wise at least) you want the exhaust gas to exit the car/exhaust rather quickly, due to the turbo being there, and having less resistance against the fins/turbine in general. thus quicker spool etc etc. better boost overall.
a 3 inch exhaust on a stock motor really wouldnt do anything greatly better than a 2.5 really, unless you want the sound of your car to be alot louder. (not something i suggest in VA). but the BIGGER BORE, higher compression motors these use 3 inch collectors, to 3 inch exhaust if one is present, due to the fact of the higher compression and the more flow. but usually have a fine tuned header (smsp, RMF, etc) because the design of the header usually keeps the right amount of backpressure wanted for the n/a build.
hope im right in thinking that.
a 3 inch exhaust on a stock motor really wouldnt do anything greatly better than a 2.5 really, unless you want the sound of your car to be alot louder. (not something i suggest in VA). but the BIGGER BORE, higher compression motors these use 3 inch collectors, to 3 inch exhaust if one is present, due to the fact of the higher compression and the more flow. but usually have a fine tuned header (smsp, RMF, etc) because the design of the header usually keeps the right amount of backpressure wanted for the n/a build.
hope im right in thinking that.
#8
da dragva kokopelli
Join Date: Oct 2004
Location: the last place you look
Posts: 8,949
Likes: 0
Received 0 Likes
on
0 Posts
Re: What yall think of 3in exhaust on a h22
You are right about the turbo, less back pressure= less resistance&faster spool with turbo. Now if I was running anything bigger than a ko4 I would run straight 3". I just dont understand the n/a cars running 3", it seems to be more detrimental than helpful. If i am wrong correct me, just trying to get some clarification.
when i worked at my last shop with the dyno, i put a buddy club spec 2 exhaust on my eg hatch. (its a straight pipe, with one small resonator). true 2.5 inch exhaust.
it picked up hp over the exhaust i had on the car before. but lost tq. i put in the silencer just for shits and giggles and i made more tq than i did before, but lost 2 or 3 hp. but all the 3 inch exhaust i have seen on stock motors dont do shit, but cause the car to lose torque and make alot of noise. but all the n/a guys i have followed in n/a drag racing at least use the big collectors/exhausts but finely tuned headers to make up for the loses the normal motor would lose with a huge exhaust.
#9
Its a Man part.
Join Date: Sep 2008
Location: Watching you from the yard
Posts: 635
Likes: 0
Received 0 Likes
on
0 Posts
Re: What yall think of 3in exhaust on a h22
This maybe a dumb question but since you brought it up ill just ask. What do you mean by true 2.5in exhaust. As in 2.5in piping all the way to the header.. or headers?