wiring help need
#1
sumospeedDOTcom
Thread Starter
Join Date: Nov 2002
Location: Newport News
Posts: 9,891
Likes: 0
Received 0 Likes
on
0 Posts
wiring help need
if anyone knows wiring and thinks they can help me fix my car, id much appreciate it. i live in yorktown and have a b16 crx, i will pay for services.
i had talked to shad on the phone and planned to take it down there, however, i lost my job about 6 hours after talking with him, so i now cant afford to have it towed and worked on at a full shop rate.
any help appreciated.
i had talked to shad on the phone and planned to take it down there, however, i lost my job about 6 hours after talking with him, so i now cant afford to have it towed and worked on at a full shop rate.
any help appreciated.
#5
sumospeedDOTcom
Thread Starter
Join Date: Nov 2002
Location: Newport News
Posts: 9,891
Likes: 0
Received 0 Likes
on
0 Posts
Re: wiring help need
cool thanks, im guessing you know him personally? if you could please direct him to this thread or possibly have him pm me, id gladly appreciate it. id REALLY like to get my car back running, its cost me way too much the past 6 months to just be sitting there.
#6
TTTTIIIMMMAAAAAYYY!
Join Date: Nov 2002
Location: Viva Las Vegas
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
Re: wiring help need
Okay so check it...
Whats the car doing or not doing? Give me the info on the car as well year make model.. and whatever else you think i need to figure. I cant promise anything but in most cases i can get it.
Whats the car doing or not doing? Give me the info on the car as well year make model.. and whatever else you think i need to figure. I cant promise anything but in most cases i can get it.
#7
sumospeedDOTcom
Thread Starter
Join Date: Nov 2002
Location: Newport News
Posts: 9,891
Likes: 0
Received 0 Likes
on
0 Posts
Re: wiring help need
some wires melted together where the passenger side headlight harness is, and when i clipped and reran the wires, i apparently clipped a wire that i did not know about because it was all melted together. the wire is now not connected to anything, and the car gets no power at all.
the car ran fine with the wires melted together, however the pass high beam didnt work, and i needed to get it working for inspection.
the battery is fine, full charge
its an 88 crx si with a b16 in it.
basically thats about all i can say. honestly if youd be willing to come up here and check it out and see if you can fix it, i WILL pay
the car ran fine with the wires melted together, however the pass high beam didnt work, and i needed to get it working for inspection.
the battery is fine, full charge
its an 88 crx si with a b16 in it.
basically thats about all i can say. honestly if youd be willing to come up here and check it out and see if you can fix it, i WILL pay
#9
Awesome.
Join Date: Nov 2002
Location: Virginia Beach
Posts: 13,483
Likes: 0
Received 0 Likes
on
0 Posts
Re: wiring help need
Originally Posted by dxplicitone
you have PM... just call me i got you. you want it done awake or sleeping?