Anyone with a welder?
#11
Registered member
Thread Starter
Join Date: May 2003
Posts: 6,141
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone with a welder?
Not sure on welding really.. The guy that welded it did a decent job but I found "sticks" left over that i had to break off in a few places.. All I know of is TIG/MIG really.. don't know how it works..
here is a pic of the manifold.. yea i know, its a log manifold, not the most efficient, but the only thing that would fit in my case and keep AC, and not cost $500+
here is a pic of the manifold.. yea i know, its a log manifold, not the most efficient, but the only thing that would fit in my case and keep AC, and not cost $500+
#13
Drag757.com Alumni
Join Date: Nov 2002
Location: Blacksburg/Hampton, VA
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone with a welder?
i need a small weld too, for my lower IC pipe, its got a small hole in it where i accidently started cutting it... PM me if you can help me.
#14
The Pro to call.
Join Date: Jul 2003
Location: under cars.
Posts: 6,172
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone with a welder?
that is MIG welded. the "sticks" you found was wire.
if someone got part of a stick from stick welding stuck...its 3/16"....and it doesnt leave little pieces.
basic:
TIG-clean looking, very even bead, great penetration. little to no spatter
MIG-decent bead, depending on shielding gas is how much slag/spatter you have
Stick-lots of slag that must be removed with slag hammer. also used mainly on thick metal. real hard to do on sheetmetal.
if someone got part of a stick from stick welding stuck...its 3/16"....and it doesnt leave little pieces.
basic:
TIG-clean looking, very even bead, great penetration. little to no spatter
MIG-decent bead, depending on shielding gas is how much slag/spatter you have
Stick-lots of slag that must be removed with slag hammer. also used mainly on thick metal. real hard to do on sheetmetal.
#15
Registered member
Thread Starter
Join Date: May 2003
Posts: 6,141
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone with a welder?
Originally Posted by fc735
that is MIG welded. the "sticks" you found was wire.
if someone got part of a stick from stick welding stuck...its 3/16"....and it doesnt leave little pieces.
basic:
TIG-clean looking, very even bead, great penetration. little to no spatter
MIG-decent bead, depending on shielding gas is how much slag/spatter you have
Stick-lots of slag that must be removed with slag hammer. also used mainly on thick metal. real hard to do on sheetmetal.
if someone got part of a stick from stick welding stuck...its 3/16"....and it doesnt leave little pieces.
basic:
TIG-clean looking, very even bead, great penetration. little to no spatter
MIG-decent bead, depending on shielding gas is how much slag/spatter you have
Stick-lots of slag that must be removed with slag hammer. also used mainly on thick metal. real hard to do on sheetmetal.
#16
Aequitas - Veritas
Join Date: Jun 2004
Location: Floyd, Salem VA
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone with a welder?
garan, if you want to give me the manifold tomorrow, i'll run it up here to joey tomorrow after school, and i can have it to you Friday morning, if thats cool with you too joey. Lemme know something.
#17
Registered member
Thread Starter
Join Date: May 2003
Posts: 6,141
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone with a welder?
Originally Posted by BananaBroncoII
garan, if you want to give me the manifold tomorrow, i'll run it up here to joey tomorrow after school, and i can have it to you Friday morning, if thats cool with you too joey. Lemme know something.
That would be awesome
I'll go ahead and plan on bringing it.. I'll just mark on it where the hole is with an arrow.. follow the line! hehe..
thx in advance Joey
I'll repay you in some way or another...
#19
Aequitas - Veritas
Join Date: Jun 2004
Location: Floyd, Salem VA
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone with a welder?
Originally Posted by GaRn
Hey Barry,
That would be awesome
I'll go ahead and plan on bringing it.. I'll just mark on it where the hole is with an arrow.. follow the line! hehe..
thx in advance Joey
I'll repay you in some way or another...
That would be awesome
I'll go ahead and plan on bringing it.. I'll just mark on it where the hole is with an arrow.. follow the line! hehe..
thx in advance Joey
I'll repay you in some way or another...
#20
Re: Anyone with a welder?
Originally Posted by GaRn
Hey Barry,
That would be awesome
I'll go ahead and plan on bringing it.. I'll just mark on it where the hole is with an arrow.. follow the line! hehe..
thx in advance Joey
I'll repay you in some way or another...
That would be awesome
I'll go ahead and plan on bringing it.. I'll just mark on it where the hole is with an arrow.. follow the line! hehe..
thx in advance Joey
I'll repay you in some way or another...
don't worry about it, we're used to people dickin' us around.